Seeed Studio XIAO ESP32-C6 Wi-Fi 6 Zigbee Thread Matter Board
- Genuine Seeed Studio · 3-month warranty + 7-day checking warranty
- Cash on Delivery · Delivery Rs 250, free from Rs 10,000 · Details
- Karachi 1–3 working days · other major cities 3–5 · remote areas 5–7
- Only 2 left in stock
Pickup currently not available
The Seeed Studio XIAO ESP32-C6 is a thumb-size Matter-native development board for DIY smart-home and IoT projects in Pakistan. It is powered by the Espressif ESP32-C6 SoC with two 32-bit RISC-V processors (high-performance up to 160 MHz and low-power up to 20 MHz), 512 KB SRAM and 4 MB Flash. The wireless stack supports 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE) / Bluetooth Low Energy 5.0, and IEEE 802.15.4 for Zigbee and Thread, so you can build Matter-compliant Home Assistant and ESPHome projects on one compact board.
Key features
- Espressif ESP32-C6 with two 32-bit RISC-V processors (up to 160 MHz / 20 MHz)
- 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5 (LE), Zigbee and Thread (IEEE 802.15.4)
- Matter native: designed for Matter-compliant smart-home projects
- 512 KB SRAM and 4 MB Flash
- Classic XIAO form factor, 21 × 17.8 mm, single-sided mount
- On-board antenna with up to 80 m BLE/Wi-Fi range, plus a UFL connector for an external antenna
- USB Type-C (5 V) and 3.7 V battery input, with lithium battery charge management
- Deep sleep typically 15 μA (at 3.8 V supply)
- On-chip security: secure boot, encryption and Trusted Execution Environment (TEE)
- Reset and Boot buttons; 11× GPIO (PWM), 7× ADC, UART, I2C, SPI and SDIO
Specifications
- Model: Seeed Studio XIAO ESP32-C6
- Processor: ESP32-C6, two 32-bit RISC-V cores, HP up to 160 MHz, LP up to 20 MHz
- Memory: 512 KB SRAM and 4 MB Flash
- Wireless: 2.4 GHz Wi-Fi 6; Bluetooth Low Energy 5.0; Zigbee, Thread, IEEE 802.15.4
- Interfaces: 1× UART, 1× LP_UART, 1× IIC, 1× LP_IIC, 1× SPI, 11× GPIO (PWM), 7× ADC, 1× SDIO; Reset and Boot buttons
- Power: Type-C 5 V input; BAT 3.7 V; lithium battery charge management
- Typical power (3.8 V): modem-sleep 30 mA; light-sleep 3.1 mA; deep sleep 15 μA
- Working temperature: -40°C to 85°C
- Dimensions: 21 × 17.8 mm
Compatibility
- Suitable for Home Assistant and ESPHome DIY projects
- Matter-compliant smart-home, Zigbee and Thread builds
- Programmable with the Arduino IDE using Seeed's official getting started guide
Works with: Home Assistant and ESPHome projects, Matter, Zigbee and Thread (IEEE 802.15.4).
Getting started and pinouts: Seeed Studio XIAO ESP32C6 wiki.
Genuine Seeed Studio product, sold by House Sync, Office No. 3, Prince Center, Saddar, Karachi 74700. Delivery across Pakistan. Questions or bulk quotes: sales@housesync.store.
HOUSE SYNC SUPPORT
Buy with clarity
Not sure which device fits your home? Check the details and ask our team before ordering.
Check the product description for supported hubs, wireless standards and power requirements. Ask us before ordering if you are unsure. This product: 3-month warranty + 7-day checking warranty. SONOFF 2 years, EZVIZ 1 year and all other products 3 months, covering manufacturing or software defects, plus a 7-day checking warranty on every product. Damage from surges, burning, water, incorrect installation or misuse is excluded. Warranty terms.
Estimated delivery for in-stock orders: Karachi 1–3 working days, other major cities 3–5, and remote areas 5–7. Standard shipping is Rs 250 below Rs 10,000 and free from Rs 10,000. Full shipping terms.
Planning smart lighting, switches, CCTV or networking in Karachi? Explore our installation service or share your project details for a quotation.